Right size. First time.
Use our heating calculator or ask the KIASA team to check your selection before you order.
A FIRST STEP INTO INFRARED
Kore P-Series Panel™ Infrared made simple
Start with one room. Add more when you're ready. The Kore P-Series warms people and surrounding surfaces without fans, visible light or new plumbing. Quiet warmth, clear space.
SLIMLINE DESIGN
Feel the warmth.
Forget the heater.
At just 25mm deep, the Kore P-Series sits neatly within your interior.
- No bulky radiator.
- No operating noise.
- No visible glow.
Designed to be felt. Not noticed.
Blend in. Stand out. Your call.
Clean white. Blackboard Black. Your chosen RAL colour. Or artwork that makes it entirely yours.
MADE FOR REAL ROOMS
Wall. Ceiling. Suspended or freestanding. Anything you like
Mount it where the warmth works best. Keep walls clear. Make use of the ceiling. Bring the panel lower in a high room. Or add compatible feet for portable warmth.
Your room. Your arrangement.
EASY DIY OPTION
Plug in.
Settle in.
For the simplest DIY setup, choose the built-in thermostat and remote option.
-
01
Fix the bracket.
-
02
Position the panel.
-
03
Plug in and set your temperature.
Ceiling mounting, hardwiring and external controls may require a qualified electrician.
ROOM-BY-ROOM COMFORT
For the room you use. Not the rooms you don't.
Warm the home office while you work. The living room in the evening. A garden room without extending the central-heating system.
Find my panel sizeBuilt in the European Union.
5 years of reassurance.
A galvanised aluminium body. Proven Ni-Cr heating technology. Integrated overheat protection. Made for today's room. Backed for years to come.
WHY BUY FROM KIASA
Why KIASA is the best place to buy your infrared panel.
Ask KIASAMore ways to make it yours.
Five power outputs. Two control options. Four finishes. Multiple ways to install.
Seven years of reassurance.
Every Kore P-Series panel is protected by a seven-year manufacturer's warranty.
Help that stays with you.
Clear instructions, installation guidance and UK-based support when you need it.
THE USEFUL DETAILS
Everything you need. Nothing you don't.
In the box
- Kore P-Series panel
- Wall and ceiling mounting bracket
- 1.9m cable with UK plug
- Installation instructions
- Remote when selected
Feet, suspension kits and external controls are supplied only when selected.
Technical specifications
230V / 50Hz · 25mm depth · 1.9m cable · UK 3-pin plug · IP44 · Class I · Integrated overheat protection · CE, RoHS, REACH and EMC certified.
Will one panel heat my room?
In most cases, yes — a single correctly sized panel will heat a typical room. Sizing depends on floor area, ceiling height, insulation and how many external walls or large windows the room has. As a rough guide, a well-insulated modern room needs around 60–80W per m², while an older or draughtier space with solid walls or single glazing can need closer to 100W per m². A 20m² living room therefore sits somewhere between 1200W and 2000W. Larger or open-plan spaces are often better served by two smaller panels than one large one, because the warmth spreads more evenly. Use our heating calculator for a quick answer, or send us your room dimensions and we will check the selection before you order.
What will it cost to run?
An infrared panel uses electricity only while it is actively heating. Once the room and its surfaces have absorbed warmth, the thermostat cycles the panel on and off, so real-world consumption is well below the panel's rated output — typically around a third to a half of it over an average day, depending on insulation and target temperature. To work out your own figure, multiply the panel's kilowatt rating by your electricity tariff in pence per kWh, then by the hours you expect it to run. A 1000W panel running for four hours costs four units of electricity at your rate. Because you heat only the room you are in, running costs compare favourably with heating a whole house to warm a single space.
Can I install it myself?
For the simplest setup, yes. Choose the built-in thermostat and remote option, fix the bracket, position the panel and plug it into a standard socket — the panel ships with a 1.9m cable and a UK 3-pin plug. No plumbing, no pipework, no structural work. Ceiling mounting, hardwiring into a fused spur, or connecting external controls should be carried out by a qualified electrician. Every panel comes with clear installation instructions, and our UK-based team can talk you through the options before you buy.
Downloads, warranty and returns
Every Kore P-Series panel is covered by a seven-year manufacturer's warranty. Built in the European Union with a galvanised aluminium body, proven Ni-Cr heating technology and integrated overheat protection, the panel is CE, RoHS, REACH and EMC certified, rated IP44 and Class I, and runs on 230V / 50Hz. Datasheets, installation guides and declarations of conformity are available to download below.